Important Tips for Maintaining the Glycol System

Many people who take beer do agree that it is best when served chilled. This is because the cold beer gives a unique brewed taste that is refreshing and astounding. This, therefore, is one of the reasons why those who sell beer require the glycol system. The tank is usually installed in a room that has been refrigerated. Here the beer python is used in the circulation of the extremely cold beer starting from the python, the front and back of the tank as well as the glycol block.

The glycol system transcends to the maintenance of beverages at a particular temperature which runs to the beer tap all the way from the keg. The advantage of using such a system is that it inhibits the growth and development of bacteria and wild yeast in the beer lines while at the same time reducing instances of beer wastage.

As is with every machine, the glycol system works magnificently and efficiently if well maintained on a frequent basis. However, if this is not achieved, then there will the risk of system malfunctions which will result in wastage and the growth of yeast and bacteria. Eventually, this will translate into poor beer quality which can lead to the loss of customers, something which is bad for business.

Cold beer matters, and this calls for adequate glycol system maintenance to prevent the many adversities that will result if this is not considered. To keep your system running, here are two tips worth following.

1. Check the Trunk Lines

Every once in a while, always make sure that you spend some time checking your trunk lines in spite of their highly durable nature. This is because, with time, there can be some ice build up as a result of glycol leakage or installation damage. If there is ice buildup or glycol leakage, you can call for assistance from the wide range of companies which offer repair services.

2. Check the Working Components

Another thing to consider during the maintenance of a glycol system is whether the components run flawlessly as expected. This involves running checks on components such as the motor and pump.

The working of the motor can be gauged by observing the chiller or listening to any unusual sounds produced by the motor. If there is some unexpected heat in the chiller or any strange sounds from the motor, then promptly inform a service technician to assist you further.

While concentrating on the pumps, always make sure that their connections are firm and tight. Also, be sure that all the required insulation is perfectly done. Similar to the motor, the pump should also be in smooth operation with any unusual behaviours such as grinding or clunking expressing the need for system maintenance